Cheap Diamond Polycarbonate Plastic Sun Sheets PC Embossed Sheet

Product Description

COMPANY PROFILE:

Xiamen taohong tech. Co.,ltd operates a quality management system approved to ISO 9001:2008 and dimensional tolerances to EN 755. This system allows quality management from an initial contract review through to product shipment. Laboratory facilities are also available to assist with quality assurance and any necessary metallurgical testing.

Product Description:

Characteristics	Data
Impact Strength	850J/m
Light Transmission	88%
Specific Gravity	1.2g/cm³
Coefficient of Thermal Expansion	0.065mm/mºC
Service Temperature	-40ºC-+120ºC
Heat Conductivity	2.3-3.9W/m²ºC
Tensile Strength	≥60N/mm²
Flexural Strength	100N/mm²
Modulus of Elasticity	2400Mpa
Tensile Stress at Break	≥65Mpa
Elongation at Break	>100%
Specific Heat	1.17KJ/Kg.k
Heat Deflection Temperature	140ºC
Effect of Soundproof	Reduce by 20 decibels
Flame Resistance	B1, Difficult Flame

Features:

1:Light transmittance: The light transmittance of PC board can reach up to 89%, which is as beautiful as glass. UV-coated panels will not produce yellowing, atomization, and poor light transmission under sunlight. After ten years, the loss of light transmission is only 6%, the loss rate of PVC is as high as 15%-20%, and the glass fiber is 12 %-20%.

2: Anti-ultraviolet: One side of the PC board is coated with an anti-ultraviolet (UV) coating, and the other side has an anti-condensation treatment, which integrates anti-ultraviolet, heat insulation and anti-drip functions. It can block ultraviolet rays from passing through, and is suitable for protecting valuable artworks and exhibits from damage by ultraviolet rays.

3:Light weight: The specific gravity is only half that of glass, saving the cost of transportation, handling, installation and supporting frame.

4:Energy saving: keep cool in summer and keep warm in winter. PC board has a thermal conductivity (K value) lower than that of ordinary glass and other plastics, and its thermal insulation effect is 7%-25% higher than that of the same glass. The heat is up to 49%. Thus, the heat loss is greatly reduced, and it is used in buildings with heating equipment and is an environmentally friendly material.

5:Temperature adaptability: PC board does not suffer from cold brittleness at -100°C, and does not soften at 135°C, and its mechanics and mechanical properties have no obvious changes in harsh environments.

Specification:


Colors Can be Customized



Application


Packing: